Back--------Material: Big Leaf Maple
Grains per Inch: 6
Ring Mode (Mode 5): 358 Hz
X Mode (Mode 2): 166 Hz
Mode 1: 105.5 Hz
Weight (unfinished button/roughly shaped edges): 110.4 g
Length (without button): 354
Upper Bout Width: 166
Lower Bout Width: 208
C Bout Width: 115
Arch height: 15.95
Thickness Map: Back Thickness Map
Plate Tuning: Back Plate Tuning
Bassbar- Material: Spruce
Grains per inch: 37
Weight: 5.2 g
Length: 277.22
Width: 5.44
Position:
Height (in middle): 12.27
Height (at ends): 3.32
Other: Very straight and even grain
Ribs---------Material: Maple ribs, spruce blocks, willow lining, and birch pegs
Weight: 71.1g
Rib Thickness: 1.5
Lining thickness: 1.68
Rib structure taper (height): upper block 29.77, lower block 30.96 (even taper for entire length)
Upper block size: 19.69 x 49.91
Lower block size: 19.25 x 47.12
Other: 4 pegs on back, 2 pegs on front
Top---------Material: Sitka Spruce
Grains per Inch: 44
Ring Mode (Mode 5): 317 Hz
X Mode (Mode 2): 205 Hz
Mode 1: 71 Hz
Weight (with cut ff and shaped edges): 76.1 g
Length: 354
Upper Bout Width: 166
Lower Bout Width: 208
C Bout Width: 115
Arch height: 16.39
Purfling distance to edge: 4.93
Thickness Map: Front Thickness Map
Plate Tuning: Front Plate Tuning
Other: very dense wood
Fingerboard-Material: Ebony
Length: 270.02
Height: 6.53-10.92
Width: 24.51-42.21
Scroll------------Width: 42.57
Height: 53.29
Length (with pegbox): 115.19
Other: The scroll is slightly larger and longer then the average Stradivari or Guaneri
*unlabeled units: millimeters
Making a violin
FrontPage
Comments (0)
You don't have permission to comment on this page.